IRWINQUICK-GRIPCorner Clamp : [ Ссылка ]
Irwin Medium Duty Clamp: [ Ссылка ]
For this project I wanted to keep the build cost below $100 and also ensure you don't need many tools or a truck to build these shelves. Overall I am very happy with the end product and think this project is approachable even with a very small amount of experience. Let me know if you have any questions in the comments and below are some additional details.

Overall Dimensions

Height = 8 ft
Width = 8 ft
Depth = 2 ft

List of Supplies

1) 2x4 boards: 25 total 8 ft long for the following components:
a) 6 for the legs
b) 8 for the sides of the shelves
c) 5 cut into 20 separate 21 in pieces
d) 6 cut into 24 separate 20 in pieces

2) 1/2 inch 4 ft x 8 ft sheets osb: 2 total
- Note these will need to be both cut into 2 ft x 8 ft strips for
the shelf top

3) 2 3/4 inch general construction screws
- I used 2 3/4 in but 2 1/2 in would work and are usually
much easier to find
Example: [ Ссылка ]

Tools Used

1) Irwin Medium Duty Clamp: [ Ссылка ]
2) Makita 18V combo drill kit: [ Ссылка ]
3) 9 In torpedo level: [ Ссылка ]
4) IRWINQUICK-GRIPCorner Clamp: [ Ссылка ]
5) Stanley Tape Measure: [ Ссылка ]
6) 1/8 In drill bit: [ Ссылка ]
7) T25 Drill bit: [ Ссылка ]
8) Speed square: [ Ссылка ]

Additional Tools for Weekend Warriors
Dewalt Drill Bit Set: [ Ссылка ]
Dewalt Screwdriver Bit Set: [ Ссылка ]
Craftsman Screwdriver Set: [ Ссылка ]
Eklind Allen Wrench Set: [ Ссылка ]
Pliers (4-Piece Set): [ Ссылка ]
Stanley Utility Knife: [ Ссылка ]
Studbuddy Stud Finder: [ Ссылка ]
Stanley Hammer:[ Ссылка ]
Buck Bros Wood Chisel Set: [ Ссылка ]
Klein Voltage Tester: [ Ссылка ]
Wire Strippers: [ Ссылка ]
Little Giant Ladder: [ Ссылка ]

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

свернуть