Today we work on a 2013 Dodge dart with the 2.0 liter motor. This car was suffering from a no crank no start . The owner drove it to local store and upon trying to leave the car would not start. No previous signs of issues just went from operating to complete failure. After replacing the starter which is in another video we found the car still didn't start. Upon further checking we found that our motor was not properly grounded. In this video we will walk you through what we did to get the dart back on the road. We also show you how we tested to verify it was a bad ground. Hope this helps and good luck!

Tools used :
8 MM
10 MM
13 MM
Wire Brush/Sand Paper
(If you dont have a lift you may need to put the car on ramps or jack it up for easier access)

If you do have a bad starter we have a video for that here [ Ссылка ]
If you have a bad alternator or want to do a ground upgrade see video [ Ссылка ]

Please note this is for entertainment purposes. Any work you do is at your own discretion and risk.

свернуть