Good equipment for tabbing and string and its parameter：
1) Suitable for 5’、6’ square cells and cutting cells ( the cutting cells’ minimum width is 30mm
2) Special designs for the cutting cells
3) The parameters can be set optionally by the touch screen
4) 4-way arm rotating turn-table can load different shapes of cutting cells to meet the different requirements on connection
5) For the same bus bar cells,only changing the cells’ width,the setting time is less than 20 minutes
6) For the different bus bar cells,the setting time is changing the cells’ type is less than 30 minutes
7) High flexibility for various cells.
8) The number of solar cells for the strings is settable by the touch screen.
9) The number of wanted cell strings is settable
10) Adjustable range of the gap of the cells is 2 to 30mm.
11) Operation reliable,less maintenance required.
12) Simple operation,only need one day for training.

Only one worker for two machines.

Soldering capacity: Can soldering 1200 pcs of solar cell per hour
Cell dimension; 30~125*125mm; 30~156*156mm
Cell thickness: From 160 micron and up
Ribbon sizes: Width is 1.0 ~1.6mm,
Thickness is 0.12~0.23mm
Breakage ≤ 0.3%
Cell basket capacity: Four baskets system to load up to 100pcs each,total 400 pcs
Operation control: PLC touch screen
Soldering technology: IR light
Soldering light life≥1000Hr
Soldering temperature: Normal~400℃（adjustable）
Input power: 50~60Hz/AC380V/16A
Peak power: 10KW
Average power: 4~5KW
Compressed air ≥0.5Mpa clean & dry air

свернуть