Join us as we delve into the world of smart home automation with the Apollo Automations AIR 1 Air Quality Sensor. This comprehensive guide will take you through every step of the process, from unboxing to installation, testing, calibration, and finally, our recommendation.
**Unboxing:** We start by unboxing the AIR 1, showing you exactly what you get in the package. We’ll examine each component in detail, so you know what to expect when you purchase your own.
**Installation:** Next, we’ll guide you through the installation process. We’ll use ESPHome to integrate the AIR 1 into Home Assistant, making it a seamless addition to your smart home setup.
- Sensor Information: Once installed, we’ll explore the wealth of information provided by the AIR 1’s sensors. We’ll discuss what each sensor measures and how this data can help you monitor and improve your home’s air quality.
**Testing:** We’ll then put the AIR 1 to the test, demonstrating its capabilities and performance in real-world conditions.
**Calibration:** To ensure accurate readings, we’ll show you how to calibrate the temperature and humidity sensors on the AIR 1. We’ll walk you through the process step-by-step, ensuring you get the most accurate data possible.
**Recommendation:** Finally, we’ll round up with our thoughts on the AIR 1. Is it worth the investment? Should you add it to your smart home setup? Tune in to find out!
Whether you’re a seasoned smart home enthusiast or just starting out, this video is packed with valuable insights. Don’t forget to like, share, and subscribe for more smart home guides and reviews!
Don’t forget to like, share, and subscribe for more helpful Home Assistant guides!
#apollo #airquality #safety #smarthome
🙏 If you would like to support me and this channel, you can JOIN and SUBSCRIBE 🙏
Join - [ Ссылка ]
Subscribe - [ Ссылка ]
____ ☕ Buy Me A Coffee! ☕ ___
PayPal Coffee - [ Ссылка ]
Buy Me A Coffee - [ Ссылка ]
___ 🕒📩 Timestamp 🕒📩 ___
00:00 - Introduction
01:14 - What you get in the box
02:30 - Installation
03:49 - Available Sensors
05:40 - Testing
06:54 - Temperature and Humidity Calibration
07:39 - Roundup
___ 👋 Handy Dandy Information 👋 ___
AIR-1 Air Quality For Home Assistant - [ Ссылка ]
MSR-1 mmWave Multisensor For Home Assistant - [ Ссылка ]
MSR-1 Outlet Mount - [ Ссылка ]
MSR-1 Sensor Stand - [ Ссылка ]
MTR-1 Multi-target Radar For Home Assistant – [ Ссылка ]
MTR-1 Articulating Wall Mount - [ Ссылка ]
MSR-1 How To Tune mmWave Using Home Assistant -
[ Ссылка ]
Updating Firmware - [ Ссылка ]
CO2 Calibration - [ Ссылка ]
___ 🔗 Affiliate Links 🔗 ___
NordVPN (Get 72% off NordVPN + a Saily eSIM data gift) - [ Ссылка ]
Sonoff 15% discount, *SMARTHOMEAUS*, has now been increased to 15% on ALL products!!
ZB Dongle-E - [ Ссылка ]
Zigbee Bridge Ultra - [ Ссылка ]
ZBMicro - [ Ссылка ]
SNZB-01P - Zigbee Wireless Switch - [ Ссылка ]
SNZB-02P - Zigbee Temp and Humidity Sensor - [ Ссылка ]
SNZB-02D - Zigbee Temp and Humidity Display - [ Ссылка ]
SNZB-03P - PIR Motion Sensor - [ Ссылка ]
SNZB-04P - Door Contact Sensor - [ Ссылка ]
SNZB-06P - Zigbee Human Presence Sensor - [ Ссылка ]
Bridges / Coordinators and Dongles
Sonoff iHOST Bridge - [ Ссылка ]
Zigbee 3.0 USB Dongle P Plus - [ Ссылка ]
NSPanel Pro - [ Ссылка ]
ZHA Supported devices - [ Ссылка ]
Zigbee 2 MQTT Supported devices - [ Ссылка ]
Install Zigbee2MQTT in 10 Minutes - [ Ссылка ]
SwitchBot Lineup
International - [ Ссылка ] (includes 30% OFF for all products for a limited time)
Home Assistant Server (HP EliteDesk 800 G4)
US - [ Ссылка ]
AU - [ Ссылка ]
The site receives a small commission if you order from any of the links above. This does not cost you anything and is paid by the supplier.
Ещё видео!