Purchase Link coming soon
[ Ссылка ]
Join this channel to get access to perks:
[ Ссылка ]
Article:
[ Ссылка ]
In this look-back tool review were going to look a the DEWALT DCN650. Its DEWALTs Brushless 15 gauge finish nailer. [Gen 2]
In 2017 we reviewed the Dewalt DCN650D1 15 GA Cordless Angled Finish Nailer and tried to answer the question – Is it good enough to cut the hose on the jobsite?
Back then we told you the short answer was yes it was, and that my personal opinion was, it depends. Production trim guys would still want air.
The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4″ to 2-1/2″ which makes it ideal for finish carpentry and trim work. It is powered off the 20-volt platform, weighs 5.8 lbs., and has a brushless motor.
The beautiful thing about battery-only, cordless nailers is that as long as you have a charged battery, you’re ready to use the tool. They also do not require gas cartridges or the cleaning that gas models require, which means low maintenance and reliability.
Back then we told you we liked:
Line of sight/nose
the micro nose offers a really nice line of sight, as good as any pneumatic nailer.
Selectable firing mode
While we found the tool fast it’s still not a pneumatic nailer in the speed department, while this is less important to me, I know many of you [mostly trim carpenters] feel speed is important.
I prefer using all of my nailers in the sequential mode, as speed is far less important to me. Fastener placement, safety, accuracy, and doing a good job is my focus.
Depth of Adjustment
A tool-free depth adjustment for countersinking of nails is included and was a bit stiff and awkward to operate but it did loosen up a little over time.
Jamb Release
This nailer also features a tool-free stall release lever. This lever is located near the top of the housing of the tool, it is used to release and reset the driver blade in the event of a nail jam. Additionally, the nose of the tool opens, tool-free, to access the front end of the nailer if needed.
Did we get this one right? Yep – all day long!
This nailer was a home-run for DEWALT and continues to be on today. It’s a go-to nailer that has seen thousands of board feet fastening. We highly recommend it – 4 years later.
I’ve never used the pencil sharpener or the 16” on the center gauge on the magazine, not once. Frankly, I forgot they were there. Also of the no-mar tips have long been lost.
This nailer is solid – plain and simple.
Purchase online for $319 as a bare tool
The one thing that impresses me the most about DEWALT is that they have never taken their foot off the gas with regard to their development process. Like many high-end tool companies they are constantly evolving, involving, and receiving feedback from PRO end users.
Well-done DEWALT!
![](https://s2.save4k.ru/pic/czE86Lk8f5E/maxresdefault.jpg)