Glide Gear OH 50 overhead photo and video camera boom pole arm for tripod stands, Review and problems with the Glide Gear OH 50 - Camera/Smartphone Photo Video Overhead Stand. For more videos about camera and video peripherals, see the following playlist: [ Ссылка ]

- Adjustable arm length 53cm - 91cm (21-36" inches)
- Tripod Mountable (1/4" 20 screw hole)
- Low quality phone holder included (not suitable for large phones and phablets)
- Low quality ball head included (does not have spirit level or quick release mechanism)

The mounting sled can be mounted to tripods with 1/4" 20 and 3/8 screws. The mounting sled also has two 1/4" 20 holes on each side for mounting lights and monitors.
A sturdy tripods/stands is required that can support payloads of 4.5kg (10lbs) or more.

Specs (specifications):
Construction: 6061 Aluminum
Tripod Mounting Threads: 1/4"-20, 3/8"-16
Tripod, counterweight, camera not included
Dimensions:20 x 5 x 5" (50.8 x 12.7 x 12.7 cm)
Weight: 1lbs (450g)
Max payload up to 5lbs (4.5kg) depending on tripod and counter weight.

worst phone clamp ever
They should either include a good phone clamp or not include one at all so that they can reduce the price instead.
Because either way either way you will have to buy another phone clamp.
The ball-head is low quality but it works
It doesn’t have a spirit level
It doesn’t have a quick release
So I think most people will need to buy another ball head

the arm doesn’t come with a counterweight so you have to purchase that separately.
It would be useful if they include a sandbag to be used for counter weight.
there are two washers where you can put a counterweight in-between.
the narrower part of the arm which expands out or retracts back in is a bit greasy.
the tip of the pole is covered with a small plastic piece to protect the screw which connects to the ballhead.

For more videos about camera and video peripherals, see the following playlist: [ Ссылка ]

свернуть