In this video, I test out a very buggy version of PPSSPP "PSP Emulator" that was compiled for the Jetson Nano.
It runs great but I have had so many issues just getting and keeping it running on this board but I've already spent so much time on it I figured it was time to get this video out of the way.

THIS VIDEO IS FOR EDUCATIONAL AND DEVELOPMENT PURPOSES ONLY!

More Nano Videos: [ Ссылка ]
LEARN MORE AND BUY ONE HERE [ Ссылка ]...

Learn More Here: [ Ссылка ]

Jetson Nano Specs:
Jetson Nano developer kit specifications:
* Jetson Nano CPU Module
* 128-core Maxwell GPU
* Quad-core Arm A57 processor @ 1.43 GHz
* System Memory – 4GB 64-bit LPDDR4 @ 25.6 GB/s
* Storage – microSD card slot (devkit) or 16GB eMMC flash (production)
* Video Encode – 4K @ 30 | 4x 1080p @ 30 | 9x 720p @ 30 (H.264/H.265)
* Video Decode – 4K @ 60 | 2x 4K @ 30 | 8x 1080p @ 30 | 18x 720p @ 30 (H.264/H.265)
* Dimensions – 70 x 45 mm
* Baseboard
* 260-pin SO-DIMM connector for Jetson Nano module.
* Video Output – HDMI 2.0 and eDP 1.4 (video only)
* Connectivity – Gigabit Ethernet (RJ45) + 4-pin PoE header
* USB – 4x USB 3.0 ports, 1x USB 2.0 Micro-B port for power or device mode
* Camera I/F – 1x MIPI CSI-2 DPHY lanes compatible with Leopard Imaging LI-IMX219-MIPI-FF-NANO camera module and Raspberry Pi Camera Module V2
* Expansion
* M.2 Key E socket (PCIe x1, USB 2.0, UART, I2S, and I2C) for wireless networking cards
* 40-pin expansion header with GPIO, I2C, I2S, SPI, UART signals
* 8-pin button header with system power, reset, and force recovery related signals
* Misc – Power LED, 4-pin fan header
* Power Supply – 5V/4A via power barrel or 5V/2A via micro USB port; optional PoE support
* Dimensions – 100 x 80 x 29 mm

Follow Me On Twitter: [ Ссылка ]
Follow Me On Instagram: [ Ссылка ]

Equipment I Use:
Screen Capture Device: [ Ссылка ]
Tool Kit: [ Ссылка ]
Soldering Station: [ Ссылка ]
Camera: [ Ссылка ]
Tripod: [ Ссылка ]
Raspberry Pi 3 B Plus: [ Ссылка ]
Flirc Case: [ Ссылка ]

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!

THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!
Follow Me On Twitter: [ Ссылка ]
Follow Me On Instagram: [ Ссылка ]

Equipment I Use:
Screen Capture Device: [ Ссылка ]
Tool Kit: [ Ссылка ]
Soldering Station: [ Ссылка ]
Camera: [ Ссылка ]
Tripod: [ Ссылка ]
Raspberry Pi 3 B Plus: [ Ссылка ]
Flirc Case: [ Ссылка ]

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!

THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!

#ETAPRIME #NVIDIA # NANO DISCLAIMER: Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. No Games Or Applications Are Included Or Added On Or To Any Device In This Video

свернуть