Buy Now!
New Control Arm from 1AAuto.com [ Ссылка ]

This video shows you how to install new control arms in your 2004-2009 Toyota Prius. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

This process should be similar on the following vehicles:
2004 Toyota Prius
2005 Toyota Prius
2006 Toyota Prius
2007 Toyota Prius
2008 Toyota Prius
2009 Toyota Prius

Tools you will need:
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Pole Jack
• Rubber Mallet
• Wheel Chocks

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть