As I was about to decide on my bike position, I though I would record this tutorial of one way to cut the steerer while keeping the fork in the frame and still protecting the headset from carbon dust etc.
Moving over to hydraulic disc brakes did make cutting the steerer tube a bit more challenging as you can't really remove the fork from the bike without removing the hydraulic brake hoses, or removing the bar tape so you can remove the brake levers.
Steerer tube saw guide: [ Ссылка ]
Follow me on Instagram:
[ Ссылка ]
* Some of the links above are affiliate links, using them to buy anything on Amazon will not cost you anything but it will directly help this channel as I receive a small commission. Thanks!
*NEW* If you want to help support the channel, check out my Amazon Storefront!
==============================
[ Ссылка ]
==============================
Using storefront to buy anything on Amazon (not just what I show in the storefront) will help this channel out with a small commission and will NOT cost you anything. Thanks! 🙏
![](https://s2.save4k.ru/pic/dtsiypoaWhI/maxresdefault.jpg)