I wanted to upgrade my Anycubic Vyper with a Dragon V2.0 hotend. Unfortunately, it isn't a straight forward modification which cost my some time. First, I had to use an 3d printed adapter. Second, I had to change the thermistor. I also wanted to use a 50W heating cartridge, but the board couldn't handle it. Therefore, I stuck with the original 40W heater. Finally, I went for a 5015 fan mod to increase part-cooling. Here are the links to Thingiverse and parts you need. Big thanks to the 2 designer of the free .stl files!
- V6 hotend adapter [ Ссылка ]
- Dual 5015 fan holder [ Ссылка ]
- Dragon V2.0 hotend [ Ссылка ]
- 100k thermistor [ Ссылка ]
- M3 threaded brass inserts 5mm length [ Ссылка ]
0:00-0:16 Trianglelab Dragon V2.0
0:17-0:24 V6 hotend adapter
0:25-1:38 dual 5015 fan mount
1:39-2:05 housing removal
2:06-2:20 fan removal
2:21-2:48 V5 hotend removal
2:49-2:55 unplugging
2:56-3:48 Dragon installation
3:49-4:47 fan holder installation
4:48-5:03 automatic levelling
5:04-6:06 Cura settings
6:07-6:58 Benchy print
6:59-8:00 printing quality
[ Ссылка ]
![](https://i.ytimg.com/vi/dyjTxAul_qU/maxresdefault.jpg)