Buy Now!
New O2 Oxygen Sensor from 1AAuto.com [ Ссылка ]
The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications. This video shows you how to install new TRQ oxygen sensors on your 2006-2018 Jeep Wrangler.
• Check here for more videos on the 2006-18 Jeep Wrangler: [ Ссылка ]
This process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
Tools you will need:
• 10mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• O2 Sensor Socket
• Trim Tool Set [ Ссылка ]
• 3/8 Inch Air Impact Gun
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Jeep Wrangler 2007-2018 3rd Generation JK: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![](https://i.ytimg.com/vi/e09LtFz7ots/maxresdefault.jpg)