This GlowShift video shows you how to install our 7 Color Series Quad Gauge Package into a 1999-2003 7.3L Ford Super Duty Power Stroke.
Get this diesel set here: [ Ссылка ]
This Power Stroke Gauge Package features a Diesel Boost Gauge, EGT Pyrometer Gauge, Transmission Temperature Gauge, and a 100 PSI Fuel Pressure Gauge. Also included is a Quad Super Duty Pillar Gauge Pod created specifically for the factory A-pillar of any 1999-2003 7.3L Ford Superduty F-250 or F-350. We went with this set of Super Duty gauges based on feedback from our Tech Team, who recommended these gauges and quad gauge pod as the optimal fit for the 99-03 7.3L Power Stroke.
We kick off the process by showing three different ways to install the Boost Line for the Boost Pressure Gauge. The first involves cutting the Manifold Absolute Pressure (MAP) Sensor Line and inserting a Boost T Fitting Adapter. Once installed you thread in the Boost Gauge Fitting and then run the Boost Line to it. For anyone who purchased an Air Intake Heater Plug Adapter, we locate the Intake Air Heater on the cool side of the Spyder Intake Manifold. Then we install the adapter into the manifold, once again connecting the Boost Line to it. And for customers who want to install the Boost Line directly, we drill into the Spyder Intake Manifold and connect the Boost Line using a Boost Line Fitting.
Then we install the Electronic Fuel Pressure Sensor using a 7.3 Powerstroke Fuel Pressure Sensor Adapter. We accomplish this by threading the sensor into the adapter, removing the Fuel Filter Housing Plug, and inserting the sensor and adapter into the Fuel Filter Housing. The EGT Probe is installed by drilling and tapping into the driver’s side Exhaust Manifold and securing the EGT Probe Sensor Adapter. Once the adapter is in place we thread in the probe. For the Trans Temp Gauge’s Electronic Transmission Temperature Sensor, we remove the Transmission Test Port Plug and install the sensor into the transmission.
Once all of the sensors have been installed, the sensor wires and boost line are run to the driver’s side firewall, keeping clear of any moving parts, and then into the Power Stroke’s cabin. After adding all four gauges to the Quad Pillar Super Duty Gauge Pod we proceed to install the pod, which mounts to the factory A-pillar and make all necessary wire connections. This video will walk you through every detail of the process step-by-step and provide a complete breakdown of everything needed to install our F-250/F-350 Super Duty gauges and pod.
Additional Accessories:
Expandable Circuit: [ Ссылка ]
Gauge Wiring Kit: [ Ссылка ]
Superduty MAP Line Boost T-Fitting Adapter: [ Ссылка ]
Air Intake Heater Boost Plug Thread Adapter: [ Ссылка ]
7.3L Fuel Adapter: [ Ссылка ]
⅜” Transmission Line T-Fitting Adapter: [ Ссылка ]
GlowShift’s 7 Color Gauge Series features the option of the Tinted, Black, or White 7 Color Series. The Tinted 7 Series comes with a stealth-like tinted lens and black gauge face; the Black 7 Series has a black gauge face and magnified clear lens, and the White 7 Series comes with a white gauge face and magnified clear lens. All 7 Color Gauges come standard with ultra-bright analog LED displays, microprocessor-controlled stepper motor technology which allows for extremely accurate gauge readings and incredibly smooth needle movement, selectable 7 color LED through dial lighting, and an illuminated red needle that sweeps 270 degrees.
View our entire product lineup at [ Ссылка ]
Find us on social:
Facebook - [ Ссылка ]
Instagram - [ Ссылка ]
Twitter - [ Ссылка ]
#GlowShift
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process.
