#OpenWRT #Amlogic #AndroidTVBox

Full steps can be found at [ Ссылка ]

--------------------------------------------------------------------
Things You Will Need
--------------------------------------------------------------------
   - A microSD card at least 4 GB  [ Ссылка ] |  [ Ссылка ] |  [ Ссылка ]
 
--------------------------------------------------------------------
Download and Flash OpenWRT
--------------------------------------------------------------------
   01. Download OpenWRT for Amlogic S9xxx  [ Ссылка ]     
      - Download the image that corresponds to the Amlogic chip in your device     
   03. Download Balena Etcher  [ Ссылка ]
   04. Run Balena Etcher
   05. Burn the OpenWRT image to microSD card
 
--------------------------------------------------------------------
Configure MicroSD Card for OpenWRT
--------------------------------------------------------------------
   01. Open the readable partition of the microSD card in Explorer
   02. Edit uEnv.txt in a text editor
   03. Update the FDT line to point to the correct .dtb file for your device
         FDT=/dtb/amlogic/meson-gxm-q200.dtb
   04. Save the changes to uEnv.txt and close the text editor
   05. Safely remove the microSD card
   06. Insert microSD card to Android TV box
 
--------------------------------------------------------------------
Booting OpenWRT
--------------------------------------------------------------------
   01. With an unfolded paperclip, press the reset button (sometimes hidden inside the 3.5mm AV port)
   02. While holding the reset button, plug the power adapter into the Android TV box
   03. The box should boot into the OpenWRT Linux terminal
   04. Wait for the text to stop scrolling and press Enter
   05. Run the following command to set a static LAN IP address, change the IP address to something on your LAN's subnet:
         uci set network.lan.ipaddr='192.168.0.251'
         service network restart
   06. Open a web browser and navigate to [ Ссылка ]
   07. At the login screen, enter the username root and password password ≫ Click the Login button
   08. Select System ≫ Administration from the menu
   09. Under the Router Password heading, enter a new password and repeat it to confirm
   10. Scroll to the bottom of the page and click the Save & Apply button
   11. Enjoy OpenWRT running on a cheap Amlogic TV box
 
Source:  [ Ссылка ]
 


### Connect with me and others ###
★ Discord: [ Ссылка ]
★ Reddit: [ Ссылка ]
★ Twitter: [ Ссылка ]

свернуть