I'm Giving out Carplay for Audi A6 & A7 for FREE. Just follow this guide. Really simple.

THE UPDATE PROCEDURE HAS CHANGED SINCE I CREATED THIS VIDEO, THE SOFTWARE IS NO LONGER AVAILABLE ON MY INSTAGRAM. PLEASE USE THE GUIDE & LINK BELOW - YOU DO NOT NEED TO FOLLOW ME ON INSTAGRAM ANYMORE.

ℹ️ Installation tutorial
1. Confirm you have Audi MMI MIB2 with MHI2_ER_AUG11 or MHI2_ER_AU57x SW train.
2. Download the Audi 3663 AIO update and extract it to an empty FAT32 formatted SD card.
3. Turn the engine on and make sure keyless key will stay in the vehicle during the procedure.
4. Restore factory settings in Audi MMI system.
5. Place the card in SD1 port.
6. Press and hold BACK and TOP-LEFT button to enter Red Engineering Menu.
7. Go to Update → SD 1 → Standard → Start update → Start.
8. Wait patiently for about 30-40 minutes. Unit will reboot several times. Sometimes screen will stay closed, sometimes will stay black, sometimes will stay on Audi logo. Keep waiting.
9. When it's done confirm it. Unit will reboot one final time.
10. Check if unit is now running updated firmware.

🔗 Free K3663 firmare AIO (All-in-one) update: [ Ссылка ]

🚗 This tutorial was made in Audi A7 (4G), but the same system can be found in Audi A6 C7 (4G). Audi MMI MIB2 system (MHI2) is sometimes called Audi MMI 4G.

⚠️ If your car is equipped with keyless remote, make sure that the remote stays in car at all times during the update procedure. Removing the key from the vehicle can turn the ignition off which will cause update to fail.

⚠️ Bose sound system amplifier will not be updated during this procedure. Updating it would require VCP parametrization to be performed after the update. If you wish to update it, you can use alternative metainfo2.txt file in the installation package.

This was the original guide, but the software on my instagram for some reason is no longer working. Please use the guide above.

1. ENGINE RUNNING, KEY IN VEHICLE AT ALL TIMES, GO TO MENU SYSTEM, SETUP MMI, VERSION INFORMATION & MAKE SURE YOUR VERSION IS MHI2_ER_AU57X & MHI2_ER_AUG11X
2. GO TO FACTURY SETTINGS, RESTORE FACTORY SETTINGS, SELECT YES
3. GO TO MY INSTAGRAM PAGE ([ Ссылка ]), HIT FOLLOW, THEN CLICK THE LINK IN MY BIO, SELECT AUDI MMI CARPLAY UPDATE SOFTWARE, SAVE IT TO YOUR PC/LAPTOP, UNZIP THE FILES TO AN SD CARD, THEN PLACE SD CARD INTO THE CARD SLOT IN YOUR VEHCLE.
4. CLICK BACK & TOP LEFT BUTTONS TOGETHER TO OPEN THE RED ENGINEERING MENU, SELECT UPDATE, SD1, STANDARD, START UPDATE, START, THEN WAIT ABOUT 35 TO 40 MINUTES
5. CLICK CONTINUE, CANCEL VERSION COMPARE, THEN WAIT AS SYSTEM REBOOTS (SCREEN WILL CLOSE AND RE OPEN AFTER ABOUT 15 SECONDS)
6. PLUG IN YOUR PHONE CABLE, AND PLUG IN YOUR PHONE, CHECK YOUR SOFTWARE VERSION TO MAKE SURE ITS DIFFERENT, THEN ON THE MENU SELECT 'AUDI SMARTPHONE' SELECT ACTIVATE APPLE CARPLAY


Follow on Instagram: [ Ссылка ]

I shot this whole video using a Sony ZV-1 which you can buy here: [ Ссылка ]

Best OBD2 Scan tool for Audi - [ Ссылка ]

свернуть