"This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.


For information please visit [ Ссылка ]. You will find quick reference guides and other useful information about your warranty, Bluetooth® system, and much more!


The Blind Spot Warning (BSW) system can help alert the driver of other vehicles in the blind spot area when changing lanes.

The BSW system uses radar sensors installed near the rear bumper to detect other vehicles in the blind spot area. The radar sensors detect vehicles on either side of your vehicle within the detection zone.

The detection zone typically starts from the outside mirror of your vehicle and extends approximately 10 feet behind the rear bumper, and approximately 10 feet to the side.

When the system detects vehicles in the detection zone and the vehicle is traveling at speeds greater than approximately 20 miles-per-hour, the side indicator light illuminates.

If the driver then activates the turn signal, the system chimes twice and the side indicator light will flash.

To enable or disable the system:
● Press the right or left arrow button until SETTINGS displays
● Press the up or down arrow button to select DRIVER ASSISTANCE and Press the OK button.
● Select DRIVING AIDS and Press the OK button.
● Select BLIND SPOT and Press the OK button.
● Use the OK button to toggle the system on or off.

Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information."

свернуть