Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2012-2020 Ford Focus.
This process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus
Tools you will need:
• Pry Bar [ Ссылка ]
• 15mm Wrench [ Ссылка ]
• 21mm wrench
• 15mm Socket [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 3/8 Inch Air Impact Gun
• T55 Torx Socket
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• 5mm Hex Socket
• Hammer [ Ссылка ]
• Rubber Mallet [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Ford Focus 2012-2020 3rd Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
