General contractor Tom Silva shows affordable ways to create an energy-efficient attic. (See below for a shopping list and tools.)

SUBSCRIBE to This Old House: [ Ссылка ]

Kevin and Tom insulated an attic using a combination of loose-fill (blown-in) fiberglass insulation and fiberglass batts. They cut the batts to size and installed them in-between the floor joists close to the eaves, taking care not to block the flow of fresh air coming into the attic through the soffit vents. For the floor joist bays that were inaccessible due to a subfloor, they installed loose fill fiberglass insulation using a blowing machine, which allowed them to dense pack the material inside each of the joist bays.

Cost: About $300 to $600
Time: 2 to 4 hours
Difficulty: Easy. Kneeling isn't fun, but the work itself is relatively easy

Shopping List for How to Insulate an Attic with Fiberglass:
- Fiberglass insulation (faced and unfaced)
- Loose fill insulation, for insulating under attic floor

Tools for How to Insulate an Attic with Fiberglass:
- Utility knife
- Blower pump, for pumping loose-fill insulation
- Dust mask and eye goggles
- Work gloves
- Kneepads

Steps:
1. Cut fiberglass batts to fit tightly between floor joists.
2. Lay the fiberglass batt between the joists with the paper vapor barrier facing down toward the heated space. Lightly press the batt down between the joists.
3. When installing insulation along the eaves, be careful not to cover the soffit vents.
4. Use unfaced fiberglass batts to insulate over existing insulation.
5. Add a second layer of insulation by lying unfaced fiberglass batts perpendicular to the floor joists. Butt the batts tightly together for maximum efficiency.
6. To insulate under attic floor, use a pump to blow in fiberglass loose-fill insulation.
7. Insert the hose under the floor and turn on the blower.
8. As the loose-fill insulation packs tightly into the space beneath the floor, it will slowly push out the hose. Turn off the blower when the void is completely filled.

Both the batts and loose-fill fiberglass insulation were manufactured by:
Johns Manville [[ Ссылка ]]

Insulation blowing machines are available for rent at many home and rental centers.

The insulation blowing machine that Tom used was manufactured by:
AccuOne Industries, Inc. (model#9218)

About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House INSIDER to stream over 1,000 episodes commercial-free: [ Ссылка ]

Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: [ Ссылка ]

Follow This Old House and Ask This Old House:
Facebook: [ Ссылка ]
Twitter: [ Ссылка ]
[ Ссылка ]
Pinterest: [ Ссылка ]
Instagram: [ Ссылка ]
[ Ссылка ]

For more on This Old House and Ask This Old House, visit us at: [ Ссылка ]

How to Insulate an Attic with Fiberglass | This Old House
[ Ссылка ]

свернуть