The SQ10 SQ11 SQ12 usage method are the sainell

Charging operation:

When charging, the blue light is on, then the red light flashes a few seconds This is the normal charging phenomenon).If the red light is always on, that means the camera is full charged, or it's at photo mode.

Note:

The mini camera only can be charged by 5 voltage power source for connecting laptop or computer USB interface.It CAN NOT be charged by mobile chargers or laptop chargers.

1080P video mode:

1. Inset the TF card into the camera.
2. Press the power button, the blue light is on (It's the standby mode).
3. Press the 'M' button, the red and blue lights are both on (This is the video mode).
4. Start recording: Press the power button again, the red and blue lights are flashing a few seconds then off, that means it is recording.
5. Stop recording: Press the power button again to stop recording, this time the red and blue lights are both long bright.

Photo mode:

1. After powering on, press the'M'mode button(This is the video mode).
2. Press the 'M'mode button again, the red light are long bright. (This is the camera mode).
3. Start taking pictures: Press the power button one time to take one picture, meanwhile the red light is flashing one time.

Motion detection mode:

1. Press the power button,the blue light is on (It's the standby mode).
2. Turn on motion detection mode: Long press and hold the M mode button for a few seconds, when the red and blue lights are flashed off, it starts to motion detection video.
3. Stop motion detection mode: Press the power button, the blue light is long bright, that means the recording is stopped.

Night light mode:

1. Press the power button one time, the blue light is on (It's the standby mode).
2. Start the night light mode: Press the power button and hold for 3 seconds then release it (The red light flashes for a few times, the blue light is always on standby). This is already turning on the night vision light.
3. Then start video mode or camera mode according to above instructions.

свернуть