In this video we show you How To Fit a Bespoke Wooden Staircase

Tony describes the process the guys will use to put the staircase together. Using the drawing that Lyndale stairs gave, Tony shows where the treads, kites and where the main landing will be set up.

Tony then takes some measurements in preparations for some cuts needed to make for the treads. Glue is then applied to the relevant pieces including wedges and the leading edges.

The risers are then screwed in, Tony and the guys lift the staircase in place and Pete begins installing more risers, and gluing in the bottom panels of the staircase.

Pete then screws in the north post after getting it level. The next day Tony explains the remaining detail work that he has to be done to the staircase.

Tony then does some cuts on the null and fastens it with some screws, makes sure everything is level before putting it all together for a dry run.

Later Tony begins to apply glue to the necessary treads after cleaning the excess glue, Tony then installs the final risers to complete the staircase.


Tools
_________________________________
Paslode: [ Ссылка ]
Tape Measure:[ Ссылка ]
Table Saw: [ Ссылка ]
Festool: [ Ссылка ]
Hammer: [ Ссылка ]
Ear Defenders: [ Ссылка ]
Wood Glue: [ Ссылка ]
Level: [ Ссылка ]
Spirit level: [ Ссылка ]
Rotary Hammer: [ Ссылка ]
Chisel: [ Ссылка ]
Router: [ Ссылка ]
Clamps: [ Ссылка ]
_________________________________

For all our socials! ▶[ Ссылка ]

_________________________________
#staircase #staircases #howto #howtoinstall #carpentry #constructionuk

свернуть