Setting up your car's garage door opener will only take a few minutes if you follow these three steps:
► Step 1: First, reset your car's controls by holding down the first and third buttons for approximately 20 seconds. You can move onto step 2 once the indicator light flashes rapidly.
► Step 2: Hold your garage's remote control three inches from rearview mirror. Hold down on both the remote and you button you want to program in your car. This should take about 5 seconds. Stop when the indicator light flashes (usually green). Test your car, by holding down the programed button for three seconds. Does it work? If yes, you're done! If not, move onto step 3.
► Step 3: Get a ladder and climb up to the actual garage door opener until. Remove the back plastic cover and find the "learn" button. Mine was red. Press the Learn Button. You now have 30 seconds to get back into your car, turn the car on, and press and hold the button you want to program on your car. The indicator light should now flash green and your car should be successfully programed.
Did it work? Leave me a comment and let me know!
How to program the garage door opener in your car in 3 easy steps
Теги
how to program the buttons in your car to the garagehow to program buttons garage carconnect car and garage door openersynch minivan and garagedirections connect car garage doorhelp with garage door setuphow to program the garage door opener in your carhow to program garage door opener in carhow to program car garage openerhow to program a garage door remote to carprogram liftmaster garage door opener to carhow to program genie garage door opener to car