In the video I forgot to mention that I modified the audio chain to have a wider audio response also.
Just a video mentioning some of the mods I did to this radio years ago:
DigiMax channel mod board and display that gives this radio over 120 channels, and a 3 digit display, and it even has the "in between" channels.
.
It has an echo board (internal and only adjustable internally)
the squelch knob is a variable dead key from 1 to 4 watts, most people just throw a variable resistor at the deadkey and end up with 0 ~ 8 watts and not smooth at all, but I wanted one that made sense, so I came up with the proper resistances to make it 1 watt on the low end and 4 on the high end and smooth throughout the range .
the audio chain is modded for wider more hifi sound, a little more highs and a little more lows
it also has the NPC mod (negative peak compression)
I separated the NB/ANL, ANL is now on CH9 Switch
The clarifier tracks on transmit and receive and is NOT overly sensitive, in fact I made it less sensitive so it is easy to tune people in, definitely NOT a slider.
and a few other tricks i forgot to mention.
Attention: If this video or any of my other videos are about you and you would like a custom thumbnail picture at the start of your video, just leave me a comment on your video and I will let you know how to email me the pic you would like me to use.
The picture can be you, your radio, you and your radio, or anything else you would like, as long as it is legal and tasteful.
Also note, I almost always run my RF gain down so don't think your signal is not strong, it's just the way I run my receive.
Thanks
![](https://s2.save4k.ru/pic/gfv9-OxrZ3w/maxresdefault.jpg)