To remove the door panel, open the window.
Remove the cover on the handle using an extraction hook.
Unclip the SRS cover with an assembly wedge.
Remove the trim strip in the same way.
Remove the screws with a magnetic tool.
One is behind the grab handle, one behind the SRS cover and there are two more behind the trim strip.
Pry out the door panel with the assembly wedge.
Start at the bottom, work from right to left.
Detach the panel horizontally from the door.
Unhook the Bowden cable and disconnect the electrical connectors.
Installation takes place in reverse order.
===========================================================
instagram:
[ Ссылка ]
twitter:
[ Ссылка ]
