In this video I will show you how to configure time for follow me home lights on your bmw e9x car using on-board computer menu.

Follow me home lights can be enabled by pulling the signal lever button, and the lights will stay on for configured time.

To configure time for follow me home lights, you need to follow the next steps:
1) You need to be inside the car with all doors closed.
2) Insert the key in the key slot.
3) Activate ignition mode. (by pressing start/stop button without pressing the clutch (for manual transmission) / brake (for automatic transmission) pedal).
4) Press this little round switch, of the signal lever button in down until you can see in the instrument cluster display the icon with a key and a check mark.
5) Press "BC" button from the signal lever to enter in the submenu.
6) Use the little round switch, of the signal lever button to scroll through the menu until you can see a sign like a "P" with a time in seconds in right side, under this sign is configuration for time for follow me home lights.
7) Press "BC" button from the signal lever to enter in the submenu.
8) Press this little round switch, of the signal lever button in down/up to select time for follow me home lights.
Here you have 6 options:
- 0 seconds (disabled)
- 10 seconds
- 40 seconds
- 90 seconds
- 150 seconds
- 240 seconds
9) Select what you prefer and press "BC" button.

For more videos, please see my channel: [ Ссылка ]

-----WARNING-------
You are doing this on your own risk.
I'm not responsible for any damage on your car.

свернуть