This is Ubiquiti U6-Lite. A Dual Band MiMO (multiple-input and multiple-output) WiFi 6 Access Point.

Timeline
00:00 - Intro
00:14 - speed before and after
01:03 - remove it (from where is mounted) with special tool
01:27 - power it on (48v PoE adapter NOT INCLUDED)
02:10 - specs highlights
02:40 - led status indicators
03:13 - adoption without unifi controller
05:48 - how to reset the device to factory settings
06:45 - what to do when unifi controller is not able to see it
08:20 - adoption via unifi controller
09:20 - both access points are acting as one wifi network
09:52 - conclusion and how to find out the ap's ip address


It delivers up to 1.5Gbps AGGREGATE radio with 5GHz and 2.4GHz radios.
What this means you ask? Well,
- If your device can connect to 5GHz, you get up to 1.2Gbps;
- If you can connect only to 2.4GHz, you get 300Mbps.
Clear? Clear.

Highlights:
- 5 GHz WiFi 6 band, 2.4 GHz WiFi 4 band
- 1.5 Gbps aggregate throughput rate
- PoE 48V, 0.32A PoE adapter (not included)

If you have seen my video about UAP-AC-M ([ Ссылка ]), this one is no different: you need either UniFi Network app on your phone or UniFi Controller in order to set it or manage it. But it’s very simple!

There are two ways to do this:
- set it up as independent device - limited settings
- set it up within the unifi controller

- Self-Hosting your UniFi Network Without a Console:
-- Windows, macOS: [ Ссылка ]-
-- Linux: [ Ссылка ]
- Led status indicators: [ Ссылка ]
- Data sheet: [ Ссылка ]
- Product page: [ Ссылка ]
- Installation guide: [ Ссылка ]

Filmed with iPhone Xs.

свернуть