If you didn't see how I built this machine, you can do it here: [ Ссылка ]
After doing this test I deduced a couple of conclusions which can be helpful for you.
9RPM It's definitely too slow. I suppose 15 or 20RPM would be a better solution. If I find time someday, I'll change pulley's. It causes that bender will bend a material faster than now.
Wheels which hold material have to be tempered. I thought this process pass me by but I was wrong.
I'm going to give all axes to temper. It won't damage them moreover It'll give them a positive effect.

Advantages of this project:
A cylinder and a hydraulic pump: I'm content with this system and I suppose It's much better solution than a screw and nut.
Replacement of bearings in the middle part was accurate. A roller is much stiff than before.
A switch R-0-L holding in the hand turned out to be better option than mounted directly to the bender.

As you have seen, the largest material I bend is 30x30x2mm. Behind the camera I tried 30x30x3 and it worked, although it took a bit longer. I think that the 40x40x2mm profile is the maximum size that this machine can bear.

Some tools I used in this construction:

Self made:
Belt grinder 2x48 - [ Ссылка ]
Vise - [ Ссылка ]
Drill press STAND with COOLANT SYSTEM - [ Ссылка ]

and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Mag drill Evolution EVO MAG 28
Band saw Stiler BS 712R
Drill press ZX7016

----------------------------------------­­------------------------------------

Videos that you may like:
[ Ссылка ] - MOTORIZED Plasma Cutting Track
[ Ссылка ] - Simple Power File DIY
[ Ссылка ] - Chain Saw HACK 7 - Drill Attachment
[ Ссылка ] - KEYWAY on the LATHE


----------------------------------------­­------------------------------------

Social media:
FB: Made in Poland
Insta: made_inpoland
----------------------------------------­­------------------------------------

Music by YouTube library :
Nightingale
Love Now
----------------------------------------­­------------------------------------

свернуть