You can find more of the best mods for your watch Casioak here.
full watch👉[ Ссылка ]
watch mod parts aliexpress search for :VICKIT MODWATCH
👉[ Ссылка ]
Are you bored with the way your G-shock watch looks? In this video, I'm going to show you how to change it up and give it a new look with Casioak mods. You'll see how easy it is to switch out the strap, bezel, and buttons to create a whole new look for your watch. So if you're ready to add some style to your G-shock, let's get started.
Tools required for modification: needle picker, cap picker, screwdriver, waterproof oil
Three steps to modify Ga2100 1A1 to AP Royal Oak version:
0:20 Use a needle picker to pick out the pin between the case and the strap
0:34 Use a screwdriver to unscrew the four screws on each side and remove the original Dark knight case
1:00 Unscrew the four screws on the bottom watch back cover
1:12 Take out the back cover and remove the waterproof film and film
1:19 Carefully take out the watch movement, pay attention to the use of the needle lift to pick out the handle of the iron bulge, this step must be careful
1:33 Remove the lens of the watch cover using a cap lifting device
1:58 Fit the Tiffany colored inner ring and align it with the marker
2:09 Fit the lens and and black waterproof ring
2:23 Finally before put the lens on, make sure that nothing dust on it, clean the inside and outside of the surface before installing
2:34 Use a mirror press to recompress the mirror and re-observe for smoothness
2:54 Use the needle picker to remove the marker, and then carefully use the needle picker to remove the hands, hour hand, minute hand, and triangle hand
3:23 pick along the edge of the dial to carefully pick the surface of the black dial along the crevice.
3:32 Put the wiped Tiffany dial, the position should be on the prominent position of the hand
3:58 The hand should be positioned, aligned with the hole, and pressed into the protrusion
5:02 Wipe the dust on the surface, and debug the hands for normal operation
5:37 Fill in the black scale and fill in the Tiffany inner ring
5:50 Reinstall the waterproof glue and the waterproof ring, and screw the back cover
6:01 Reapply waterproof oil to the waterproof ring
6:49 Adjust the time to make it accuracy
7:50 Screw in the screws on the four sides to secure the case
8:31 Aim at the through hole of the watch band and case and insert the band adapter needle
8:44 Install the bow buckle, use a pin picker to fix the spring position, and then insert one section of the bow buckle, and the other section of the button with a button.
9:39 Finished product display
👌Enjoy your handmade mods. Hopefully this video will get you started on modding your Casioak.
#gshock #casioak #ga2100 #modification #diy #watch #watchmodify #watchparts #watchaccessories
![](https://s2.save4k.ru/pic/hZFyW2nzgFQ/maxresdefault.jpg)