Shop for New Auto Parts at 1AAuto.com [ Ссылка ]
This video shows you how to install a new intake manifold on your 2005-2010 Dodge Dakota. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is adding to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.
This process should be similar on the following vehicles:
2005 Dodge Dakota
2006 Dodge Dakota
2007 Dodge Dakota
2008 Dodge Dakota
2009 Dodge Dakota
2010 Dodge Dakota
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pocket Screwdriver
• Pry Bar [ Ссылка ]
• 12mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 7mm Socket [ Ссылка ]
• 8mm Socket [ Ссылка ]
• Coolant Funnel Set [ Ссылка ]
• Fuel Line Disconnect Tool [ Ссылка ]
• Trim Tool Set [ Ссылка ]
• Vacuum
• Pliers
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Bungee Cord
• Marker / Writing Utensil
• Paper Towels [ Ссылка ]
• Sandpaper
• Drain Pan [ Ссылка ]
• Nylon Brush [ Ссылка ]
• Pick [ Ссылка ]
• Razor Blade / Gasket Scraper [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
