This video to show how to descale on Plastic injection moulding
"Ingeniously change plastic production and get rid of scale problems!"——Facing the long-standing scale problem, our descaler will bring endless possibilities and more profits to plastic manufacturers.
The microelectronics produced by the nano-alloy descaling device can effectively prevent the formation of scale. The cooling system descales and prevents scale in the injection molding machine. Zero energy consumption. Once installed, it will last for a long time.
Scale is a common pollutant in tap water, especially in areas with hard water. Scale will cause great harm to equipment such as drinking water pipe networks and cooling water circulation systems. In order to solve this problem, scientists have developed a nano-alloy scale remover, which can effectively prevent scale from forming in the cooling system through the action of microelectronics.
This nano-alloy scale remover is refined by nano-technology and contains a variety of active ions and trace elements, which can decompose calcium and magnesium ions in water into particles and prevent them from forming thick scale in the pipe network. At the same time, it can also stimulate the combination of ions in water and microorganisms through the action of microelectronics, preventing them from forming bacterial scale in the cooling system.
The descaling device has unique design, simple installation, and long-term effective after one installation, which can effectively reduce equipment failure rate and maintenance cost, and save a lot of energy at the same time. It has been verified by experiments that the descaler can reduce the scale thickness in the cooling system by more than 95% after being used for 1 to 3 months, which greatly prolongs the service life of the equipment.
While removing scale, the scale remover can also prevent scale from forming in the cooling system, which is an advantage that many traditional anti-scale methods do not have. Scale will reduce the heat exchange efficiency in the cooling system, which will affect the normal operation of the injection molding machine, and the use of nano-alloy scale remover can solve this problem.
While the nano-alloy scale remover removes scale, it also has an important advantage, that is, its zero energy consumption. The traditional descaling method needs to consume a lot of electric energy and chemical agents, but the nano-alloy descaling device requires very little electricity to operate, and will not cause any pollution to the environment.
In short, the nano-alloy descaling device is an efficient, low-cost and long-term descaling method, especially suitable for cooling systems in injection molding machines and other equipment. Its use can not only effectively prevent the formation of scale and bacterial scale, but also greatly extend the service life of equipment, reduce equipment maintenance costs and energy consumption, and bring more convenience and benefits to our production and life.
Improving your production efficiency, reduce costs, and zero scale attack!
Just need one set of Zero-energy, Zero-chemical, “Nano-alloy Descaler” is needed to get rid of the trouble of scale and make the production process smoother.
Plastic manufacturers and users of water recycling systems, don't miss it!
Our Customers' Actual Experience
The power cost saving of the chiller reaches USD 20,000/annual.
If you are interested in knowing how to use it in your cooling system, you can provide me with the following information, my engineers will give you professional suggestions.
- Type of cooling system: Water chiller, cooling tower......
- Cooling pool capacity : 8 CBM.....
- Equipment Type : Injection Molding Machine, Boiler, Air conditioning cooling....
- Quantity of production equipment : 20set Machine......
- Water sources : Tap water, River water, Pure/Soft water, Underground water.
- Diameter of main cooling water pipe : DN80...... DN300 (The Dimensions after passing through the water pump)
