Follow this instruction video on how to use a Digga Auger Drive Service Kit and carry out a service on PD25-PD50 drive units.
Please make sure to read the instruction guide before starting to service your drive. More information on how to get prepared below.
Want to purchase a DIY Service Kit for your Digga Auger Drive? Visit [ Ссылка ] for all details.
______________________________________________________________________
Before starting your service:
ENSURE YOU HAVE THE CORRECT TOOLS YOU NEED BEFORE YOU BEGIN
• Torque wrench
• Socket / Spanner - 21mm (13/16")
• Allen key – 6mm, 8mm, 10mm
• Chisel
• Dead blow hammer
• Scraper / scourer
• Wire brush
• Screwdriver
• Flat metal plate – At least 1” thickness (minimum size of shaft seal)
CONSUMABLES
• Cleaning rags
• Loctite 263 high strength thread locker (or equivalent)
• Loctite 567 sealant (or equivalent)
• Loctite SI 587 flange sealant
• Heavy duty grease
• Alcohol-based cleaner
• Marker - Light colour
PERSONAL PROTECTION (PPE)
• Gloves
• Safety glasses
• Ear plugs
SERVICE KIT CONTENTS CHECKLIST*
• Instruction Guide
• Gear Oil (5L)
• Shaft Seal
• O-rings
• Next Service Sticker
*NOTE: Not all O-rings may be required, depending on your auger drive model
During this procedure, you will be inspecting for signs of wear & tear - if metal fragments are found in the shaft seal, the gearset and shaft will require removal, and further inspection (follow instructions overleaf). If this occurs, please phone Digga service for advice 1300 4 DIGGA
Are you looking for your very own Digga Attachment? Be sure to checkout all our links below!
Checkout Digga Australia [ Ссылка ]
Follow Us!
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
![](https://s2.save4k.ru/pic/i0iSScA8uiA/maxresdefault.jpg)