Support my work [ Ссылка ]
Brushless outrunner motors are the working horse of the RC hobby. They power everything now: drones, airplanes, cars, boats. And from time to time they just burn. You can buy a new one, they are not that expensive, but you can also rewind them.
To rewind brushless outrunner motor winded in dLRK (95% of cases?) you only need 3 things: motor, wire, and time. And a knowledge of how to do it.
In this video, I'm running first test freshly winded motor: 2204 brushless outrunner 12N14P multiphase motor using dLKR winding scheme and terminated in Delta configuration.
My goal was to have a slowly rotating motor, so each coil was winded with 22 turns of 0.32mm copper wire. The result was above my expectations... only 1.7A at full thrust on 3S and 5x3 inch propeller. This is a really slowly rotating "beast"
How to wind and rewind an RC brushless motor | part 3
Теги
dc motorquadmeupdlrk motordlrkdlrk motorsdlrk motor windingrc motor windingrc motor winding rulesbrushless rc motor windinghand winding rc motorrc electric motor windingsrc car motor windinghow to wind an electric motorstar delta working principlestar delta starter working principlehow to wind an armature for electric motordlrk windingdlrk winding diagramdlrk winding schemeelectric motormotor winding12n14p winding