Full change of oil, oil screens and oil filter on the KTM RC390 (2014-2017).
[ Ссылка ]
Equipment
Socket wrench (18 mm, 13 mm, 8 mm)
Allen key set
Oil pan
Oil filter
[Large oil screen]
[Small oil screen]
[O-ring replacements]
1.6 L oil (15W50 motorbike)
Funnel
Instructions / Timings:
00:20 Oil filter kit contents
00:40 Removal of right panel
01:23 Removal of left panel
01:53 Removal of front spoiler and belly pan
02:12 Oil change
02:38 First screen removal
03:10 Second screen removal
04:36 First screen replacement
05:18 Second screen replacement
05:46 Oil filter removal
07:22 O-ring replacement
07:50 Oil filter replacement
08:11 Oil refilling
08:55 Oil level check
Tips:
Lay cardboard down underneath bike to catch oil spills.
Place screws in separate compartments/tins in an arrangement to remind you where they came from and to not lose them.
Place fairings on a soft surface once removed, to not scratch them.
Lubricate O-rings of components with old/new oil before putting back.
Use a funnel to refill oil (some come with a sieve filter!).
Add just under 1.6 L to begin with, then top up ~50 ml at a time if necessary.
![](https://s2.save4k.ru/pic/iGYiGkObpJU/maxresdefault.jpg)