DMX fire machine Instructions

1: First of all, thank you for choosing MOKA DMX fire machine. Please thoroughly read this manual before operating it and keep it well for future reference.
2: When you received the machine. Pls check the packing box integrity and machine inside. If there is any damaged happened. Pls take pics for the box and machine, and send it to us.  
3: The fire machine shall be installed in the Place where the diameter big more than 8M and high than 3M. Do not make any flammable materials get close to it.
4: Put the machine in the proper place with the spout upward.
 
DMX 512 function:
1: When connect to the dmx controller, push the first channel key to up,the fire machine will jet a fireball.
2: to push the first and the second channels key to up at the same time, the fire machine will show fire pillar.
3: This fire machine can continue shoot fire 3 seconds, and then cut off by itself. So don’t shoot the fire machine more than 3 seconds. Otherwise it will damage the machine.
 
Technical parameters:
Voltage: AC110V-220V, 10%, 50Hz-60Hz
Fire Jet Height: 1-2m
Power: 200W
Coverage: 1m⊃3

Email:info@mokalighting.com
Phone:8618998818260
Web:www.mokalighting.com

This item flame machine can shoot 3 meters(5 Feet)
DMX 512 Control Mode,also can design as your request with eclectric Control

свернуть