Battery Capacity Volt Meter for Lithium, Lead Acid, Lifepo4 batteries.
Review on this item, showing settings select battery types and number of cells in series.
Supports 12 to 48vdc.
LCD backlight display, panel mount, plastic case.
With a Setting and a function button on front and wire terminal at the back.
Battery capacity volt meter settings.
To enter settings--Hold setting button and power on meter.
Setting button select - P = 12v lead acid, L = Lithium 3.7v, F = 3.2v Lithium iron phosphate.
Function button select - number of cells in series, (power off to save settings).
Display option settings-- as above but don’t power off, (when the number of cells in series is flashing) hold setting and function button for 2 seconds to enter this setting.
Setting button cycle through the settings and Function button turns each settings on and off.
S1 - % and V display rotates every 2 seconds.
S2 - Inactivity sleeps in 10 seconds.
S3 - Turns on backlight.
S4 - Show logo.
S5 - Discharge mode selection.
If you like my videos, please give me a thumbs up and subscribe, thanks for watching.
I purchased this item from eBay Australia around $12 AUD.
