Buy Now!
New A/C Evaporator from 1AAuto.com [ Ссылка ]
This video shows you how to install an EVAP core on your 2007-2013 Chevrolet Silverado.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 13mm Wrench [ Ссылка ]
• 15mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 5.5mm socket
• 7mm Socket [ Ссылка ]
• Heater Hose Removal Tool
• Trim Tool Set [ Ссылка ]
• Side Cutters
• E14 Socket
• E18 Inverted Torx Socket
• T50 Socket [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Swivel
• Torque Wrench [ Ссылка ]
• Drill
• Drill Bit Set [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Wire Ties
• Magnet - Extendable
• Pick [ Ссылка ]
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![](https://i.ytimg.com/vi/j1h5lrpm8mw/maxresdefault.jpg)