Buy Now!
New Exhaust Manifold from 1AAuto.com [ Ссылка ]

This video shows you how to install an exhaust manifold on your 2004-2008 Ford F-150 (5.4L 3 Valve). The exhaust manifold collects the combustion gasses from your vehicle's engine, and directs them to the rest of the exhaust system. Frequent heating and cooling can lead to cracks or leaks. Installing a new exhaust manifold is often the only solution.

This process should be similar on the following vehicles:
2004 Ford F-150
2005 Ford F-150
2006 Ford F-150
2007 Ford F-150
2008 Ford F-150

Tools you will need:
• Pry Bar [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• 24mm Socket
• 5.5mm Socket
• 7mm Socket [ Ссылка ]
• 8mm Socket [ Ссылка ]
• Acetylene torch
• Twist Socket / Extractor Socket
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• 1/2 Inch Socket [ Ссылка ]
• E7 Inverted Torx Socket
• 1/2 Inch Ratchet [ Ссылка ]
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Swivel
• Block of Wood
• Brake Parts Cleaner
• Sandpaper
• Hammer [ Ссылка ]
• Razor Blade / Gasket Scraper [ Ссылка ]
• Sanding Block
• Wire Brush [ Ссылка ]

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть