Join the Facebook Group: [ Ссылка ]

In another video I explained how to measure the length of a Shimano chain. With the correct chain length sorted out its now time to learn how to install a Shimano chain pin.

The chain pin is made up of two pins attached to each other. One end has a flat surface, the other a cone.

The idea is to connect the two ends of the chain and put the pin with the flat part into place. You do so by entering the entire pin with the cone shape part for easy entry.

You then use a chain tool to push the pin into place. Be aware you must use quite a bit of force to push the pin into the chain. This is because both ends of both halves are thicker than the middle.

When you feel the pin sits correctly you can release the chain and test if the chain moves freely. You can do so by bending the chain in its natural direction.

Rotate the crank and see if the chain moves smoothly over the jockey wheels. If not the pin's fit is too tight and you can do the following:

- See if the pin sits correctly and adjust accordingly if not
- Flex the chain where the pin resides from side to side so the pin can readjust.

You don’t need another tool than the chain tool you’ve already used. Put the opposite end of the chain tool on the part of pin extending outwards and snap it off.

Tools used:
Chain Tool: [ Ссылка ]

I've also written about blog post with more information. If you want to read this article go to "link coming soon"

Visit my website for more bike restoration tutorials: [ Ссылка ]

Instagram: [ Ссылка ]

Music is from the YouTube Audio Library
Song is "Sage" from Slenderbeats

свернуть