Opalescence Boost in-office whitener is chemically activated, so it does not require a light for whitening. Syringe-to-syringe mixing activates the product just prior to application. The activated 40% hydrogen peroxide is conveniently delivered via syringe and applied to teeth for whitening.
Instructions:
1. Wear protective eyewear and clothing and provide protective eyewear and clothing for your patient. Check to see that the syringes are securely attached before mixing.
2. Press all mixed gel into the RED syringe. Separate the two syringes and attach the Micro 20 ga FX® tip onto the red syringe. Check the flow on a cotton gauze or mixing pad prior to applying it intraorally. If you encounter resistance, replace the tip and recheck the flow.
3. Place Ultradent® IsoBlock bite block and self-supporting plastic cheek retractors. Completely rinse and air dry teeth.
4. Securely attach a Micro 20 ga tip to OpalDam® Green resin barrier and check flow. Air dry gingiva. Express a continuous bead along the gingival margin, overlapping approximately 0.5 mm onto the enamel. Begin and finish the bead one tooth beyond the most distal tooth that is being whitened, building the barrier 4–6 mm high and 1.5–2.0 mm thick. Express the resin through any open embrasures.
5. Light cure the OpalDam Green resin barrier for 20 seconds per arch using a scanning motion.
Carefully check the resin cure with an instrument.
6. Apply a 0.5–1.0 mm thick layer of Opalescence Boost gel to the labial surface of the tooth and slightly onto the incisal/occlusal surfaces. Allow the gel to remain on the teeth for 20 minutes.
7. Suction gel from teeth using the Ultradent® Luer Vacuum Adapter and SST™ tip or a surgical
suction tip. Do not use water. Repeat steps 6–7 two times, or until desired results are achieved.
Do not exceed 3 applications per visit.
8. After the final application is complete and all visible gel is removed, thoroughly rinse the teeth.
9. Gently slide the tip of a dental instrument beneath the OpalDam Green resin barrier and lift it off. Check for and remove any interproximal remnants.
10. Evaluate the shade change. If additional whitening is desired and no significant sensitivity
is noted, reschedule the patient in 3–5 days for repeat treatment or to dispense take-home whitening trays.
For more info on Opalescence Boost click on the following link [ Ссылка ]
For more info on Ultradent Products in India visit [ Ссылка ]
Like us on Facebook [ Ссылка ]
Contact Miraculous Dental Solutions to procure Ultradent Products in India
![](https://s2.save4k.ru/pic/jD7TuzeLj1o/maxresdefault.jpg)