Shop for New Auto Parts at 1AAuto.com [ Ссылка ]
This video shows you how to install a new master brake cylinder in your 2003-2007 Honda Accord. The brake master cylinder and fluid reservoir deliver the fluid and pressure needed to actuate your brake calipers or wheel cylinders. If your master cylinder is leaking or damaged, you need to replace it to ensure safe brake operation.
Estimated installation time for a professional technician is approximately: 1 hour 36 minutes
This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• 10mm Wrench [ Ссылка ]
• 12mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Brake Fluid
• Brake Parts Cleaner
• Gloves [ Ссылка ]
• Safety Glasses
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
