Today marks the release of our second MHD+ feature, Antilag! It is available now for all MEVD DME's (S55/N55/N13).
Antilag allows you to quickly build a set amount of boost while limiting acceleration, then quickly take off once released. To activate antilag, press and hold the cruise control SET button (or LIM, depending on your region) on your steering wheel and apply heavy throttle. Our antilag strategy will adjust the engine calibration to build boost. Once boost is built, release the button and go! The time required to reach boost target will vary depending on your turbo, but even large upgraded turbos are able to hit high boost within 1-2 seconds! Use our MHD monitoring with a boost gauge on screen to get a feel for the time your setup takes.
There are also various safeties in place such as coolant temp, EGT temp, max duration per use, and cooldown time between uses. These values, as well as the time delay after button press until antilag activates are all set to safe values for those using the OTS antilag flash option. OTS users will have the ability to adjust the antilag boost target (max value depends on engine).
Finally, custom tunes will have the ability to adjust ALL of the above values. We will be uploading the updated XDF files today.
NOTE! If using antilag while rolling in an AT or DCT car, please ensure you are in Manual shift mode so that unwanted downshifts are avoided upon applying throttle.
