Axle-boxes are next as I will need to make sure the axles turn OK before fitting the frame stretcher that carries the boiler feed pump.
Building this model steam engine in 2 1/2 inch gauge, Dyak (an LBSC design) continues as the old axle-boxes are replaced with new from cast stock. There is a suspension system to make as well which consists of springs, guides and keeps. As I had to widen the horn blocks to square them up, the casting for the axle-boxes is only just big enough to allow for machining so no mistakes are allowed!
Now the frames are assembled fitting the axle-boxes leads on to machining the axles ready for refitting the wheels. Soon Dyak will be back as I received her but in much better shape.
This episode concludes with the assembly of the components made.
If you are interested in 2 1/2 gauge model steam locomotives please visit the National 2 1/2" Gauge Association website [ Ссылка ]
I hav no affilliation other than it is a great source of information and worthy of a visit.
Please comment and subscribe!
Enjoy!
![](https://s2.save4k.ru/pic/jqD7L22RcBk/maxresdefault.jpg)