CAULK DEVIL CAULK SMOOTHER & REMOVER

2 TOOLS IN 1
REMOVES OLD CAULK QUICKLY & EASILY.
CREATES A PERFECT CAULK BEAD.
WON'T SCRATCH SURFACES.

INFO:
Get professional results when caulking around tubs, sinks, windows, doors and other areas with the Caulk Devil Caulk Smoother & Remover. This dual-function tool provides an easy solution for both removing old caulk and applying new. The caulk remover (red end) quickly and easily removes old caulk without scratching surfaces, and the caulk smoother (black end) creates a perfect bead making every job a professional one.

To Remove Old Caulk:
1. Hold Caulk Devil upright and use sharp point to loosen old caulk from surface.
2. Use the curved sharp edge and pointed tip to scrape away loose caulk.
3. After use, clean tool with soap and water.

To Smooth Caulk:
1. Unfold Caulk Devil to reveal caulk smoother (black end).
2. The caulk smoother is marked with bead size indicators. Select your desired bead size. Holding tool with wedge area facing downward, carefully cut away from your body using a utility knife. If unsure of bead size, start at the smallest size first and test.
3. Apply caulk around tub, sink, window or door. Use caulk smoother within 5 minutes of application or before caulk begins to set.
4. Hold the smoother in your hand at a 30° angle with the wedge area facing upward and positioned to remove excess caulk. Place tool at one end of the bead and push forward along the caulk application line, scooping up excess caulk and leaving a neat, even bead. If larger bead size is desired, refer to step #2. As needed, remove excess caulk from tool with a paper towel or rag.
5. When finished, clean silicone or polyurethane caulk from tool with a dry cloth. Rinse off latex or acrylic caulk with soap and water.

Subscribe for new videos and visit [ Ссылка ] to see our products.

свернуть