G'day everyone,
In this video I will be making a new ER 32 collet chuck for the lathe. I previously bought a MT3 ER32 collet chuck for the mill, which I occasionally used in the lathe as a collet chuck. Whilst it did work, I was never happy with the rigidity of the style of chuck, and the limited length of stock that I could use with it was an issue.
In this video I will machine a new collet chuck from a solid piece of 80mm steel. This one will mount to the spindle nose directly, which should be much more rigid. I will also be testing out my new tool post mounted grinder to grind the 8 degree collet taper.
I hope you enjoy the video.
#machining #diy #minilathe
Timestamps
0:00 - Introduction
1:40 - Mounting and Facing The stock
2:44 - Machining The Recess For The Spindle Nose
3:55 - Drilling and Tapping The Mounting Stud Holes
6:26 - Machining The Collet Chuck Body
8:14 - Drilling Holes For The Tommy Bars
8:57 - Cutting M40 x 1.5 Thread For The Collet Nut
9:50 - Boring Through The Collet Chuck
11:10 - Cutting The 8 Degree Taper
13:10 - Grinding On The Lathe
14:10 Sanding The Collet Chuck
14:54 - Final Grind And Test
