Диагностика проходит в три этапа:
1- мультиметром в положении прозвонки проверить пробой проходного конденсатора и катушки магнетрона на корпус, с каждого контакта. Дополнительно перепроверить положением мультиметр на 200МОм (отсутствие пробоя означает работоспособность магнетрона).
2- мультиметром в положении позвонки проверить целостность проходного конденсатора и катушки магнетрона (питание на контактах означает работоспособность магнетрона)
3- визуальный осмотр (на месте посадки колпачка должны отсутствовать прогары, магниты не должны иметь разрушений)
Diagnostics takes place in three stages:
1- with a multimeter in the dial position, check the breakdown of the pass-through capacitor and the magnetron coil on the case, from each contact. In addition, check the position of the multimeter at 200 MΩ (absence of a breakdown means that the magnetron is operational).
2- check the integrity of the pass-through capacitor and the magnetron coil with a multimeter in the spine position (the question mark on the contacts means the magnetron is operational)
3- visual inspection (there should be no burns at the place where the cap fits, the magnets should not be damaged)
Ещё видео!