Further information, pictures and videos about the 3D creation of the Animations-Maschine at:
▶️ [ Ссылка ]
Working under the covers can be exhausting! Not so if the ceiling system is explained as a 3D installation video. Here plasterboard panels can be mounted overhead, screw holes filled and butt joints grouted without getting into your arms.
3D assembly video - joint filler for acoustic ceilings
There are special tube fillers for special ceiling tiles. Simply cut open, into the cartridge gun and into the joint. There are defined drying times, assembly instructions and grinding specifications to be observed. These are explained in detail in the assembly video.
The correction of joints with a subsequent repair is also described. During the 3D animation, tape was animated, which was smeared with the grout and then pulled off the plasterboard.
In terms of 3D technology, it was possible to take over some of the previously created assembly video for this video implementation, which was produced for the same customer. The complete 3D environment, including lighting setup and room design, already existed. 3D models of tools and their complete assembly animations, such as the application of liquid adhesive using a paint roller, could partially be adopted 1 to 1. These only had to be supplemented with new passages. These savings also resulted in low cost of production. What has been created once in 3D can be used again and again.
Implementation of video production - 2021
-----------------------------------------------------------------------------
Have your own 3D assembly video created?
Do you also have products from the area of ceiling mounting, acoustic ceilings, sound insulation, plasterboard, interior construction or generally interesting technical products for which you want to have the correct assembly explained?
But you don't yet know whether this will work for you and your product? The Animations-Maschine offers you a free initial consultation. Let's just talk about your product and project. Together we will work out an ideal solution for your project. You then decide in your own time whether you want to finally have a 3D animation or an assembly video produced.
Arrange a free initial consultation now:
▶️ [ Ссылка ]
![](https://s2.save4k.ru/pic/kUIT2lWqZYg/maxresdefault.jpg)