Click for more info and reviews of this BullRing Truck Bed Tie Downs:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Hi everybody, Andy here with etrailer.com, and today, we're gonna take a brief look at these BullRing Inner Truck Bed Retractable Tie-Down Anchors. These heavy-duty anchors are specifically designed to fit the oval holes on the side wall and front wall of your 2007 and newer Chevrolet Silverado and GMC Sierras. To make sure that these are going to fit your truck, take advantage of our vehicle fit guide here at etrailer.com, and our fit guide will let you know if these will work for your truck or if we have something comparable that will work for you. These are going to provide tie-down points to secure your load, they're gonna work with S-hook and J-hook connections, and this retractable anchoring is going to lift up and out at a 35 degree angle to match the angle used when securing loads with your ratchets or rope, and then when you don't need it anymore, you just hit it down flushed when it's not in use, and that ring will be out of your way. So again, this is gonna be very easy to use, once it's installed, you just pull this ring out firmly, you hear that snap, it's going to snap and secure in place, and that ring will not accidentally slide back down, it will stay out in this position for as long as you need it, and when you're done, you just push it down, and then it is out of your way. So very simple to use, each anchor is made from a stainless steel, and so, that's gonna give you 1,000 pounds of capacity.

And installation is going to be very simple, there's not gonna be any drilling or any special tools needed. So I already have a screw loosened on this anchor, and so, to install these, you wanna loosen the screw and then remove it, and then you're just going to allow this bottom body and plate to drop down, and then while you're holding onto the cover, you're just going to position that inside of that oval hole in the side wall or the front wall of your truck bed, and then once you have that in there, you wanna pull it up, so that this metal plate makes contact with the sheet metal in your truck bed, and just pull that up to where that makes contact and the cover drops down, and then you just replace your screw and tighten it down, and it's as simple as that. So you could have all nine of these installed in no time, and then they're gonna be ready to use. And so, not only are they easy to install, they're gonna be very easy to use. You're gonna get nine tie-down anchors, and these do have a lifetime warranty.

Well, that's gonna conclude our brief look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..

свернуть