Important note: In the schematic there are two transistors, I used the IRF530 in my circuit, with that transistor the coil runs well at 12-15v. If you want to run it at higher voltages use the IRF640.
Also I could not buy the proper switches, since my local electronics shop was closed, that is why the red switch is hanging out like that.
Here is an interupter, that is very similar to the one I used: [ Ссылка ]
Timestamps:
0:00-0:17 Intro
0:17-2:02 Schematic
2:02-2:29 First power up and trobleshooting
2:29-3:33 Explenation
3:33-4:34 Oscilloscope measurements
4:34-6:45 How I build it (case)
6:45-8:30 Demo
8:30-8:42 Stunning patterns in a lightbulb
8:42-8:54 Outro
Teslaundmehr´s video: [ Ссылка ]
My backup channel:[ Ссылка ]
my safety protocol: [ Ссылка ]
