Now the we can click on power on/off button to cycle between showing battery voltage, motor current and trip total Watts/hour.
Long click on power on/off (2.5 seconds) will completely turn off the LCD power but will before save the configurations like current assist level, type information on odometer field and Watts/hour.
Watts/hour is reset if when LCD is powered on and battery voltage is almost complete charged (54.4V) other way, user can turn off the LCD that the Watts/hour value will keep counting next time. Basically, the way to reset Watts/hour is by charging the battery at max value.
The KT LCD3 is running our own developed Flexible OpenSource firmware.
TongSheng TSDZ2 950W ebike mid drive motor controller is running our improved original firmware.
The motor pulls 18 amps and with my 48V charged, it pulls 950W at startup!! With a 52V battery, would pull over 1000W.
KT LCD3 showing the following data from TSDZ2 motor:
- battery voltage
- motor power in watts
- motor current
- trip total Watts/hour
- bicycle wheel speed
- motor assist level
- brakes state
- battery state of charge
Read more here: [ Ссылка ]
![](https://i.ytimg.com/vi/leccM70jTMk/maxresdefault.jpg)