The perfect DIY window tint install tutorial video, I took your suggestions on board, I've improved my technique, and other than a measurement error on my part, which worked out ok, it looks awesome! I hope this helps you with your project.

When clicked these links will take you directly to Amazon or an eBay site, InspireDIY is an Amazon associate/eBay affiliate. Using these links does not impact the price in anyway for you, but InspireDIY may be able to earn from recommendations.

Here's a shout out! I brought my bulk roll of window film from; [ Ссылка ] and I am very happy with quality of product, the price, speed of delivery, even the quality packaging ensured that the product arrived un-damaged. (but this was locally in Australia)
so elsewhere...
on Amazon
Reflective window film for daytime privacy [ Ссылка ]
Static cling window film (easy to remove) [ Ссылка ]
Heavy duty utility knife to suit 18 mm blades [ Ссылка ]
Stainless steel blades 18 mm refill for utility knife [ Ссылка ]
Or this 9mm retractable utility knife with 50 blades is pretty cheap 983with [ Ссылка ]
A no-scratch rubber squeegee for window tint application [ Ссылка ]
Window cleaning squeegee [ Ссылка ]

or eBay
Static cling window film (easy to remove) [ Ссылка ]
Reflective window film for daytime privacy [ Ссылка ]
9mm retractable utility knife with stainless steel blades [ Ссылка ]
A no-scratch rubber squeegee for window tint application [ Ссылка ]

Below is an instruction manual if you prefer the written stuff... either take a pic, or for a PDF email me at InspireDIYemail@gmail.com or go to [ Ссылка ]
FOR USE ON GLASS WINDOWS ONLY (inside surface) DO NOT apply to plastic or plexiglass windows

Instructions for applying the window tint to windows 1. Application Area
Please choose a dust free area away from wind and out of direct sunlight.
2. Pre-clean glass
*Thoroughly clean the outside and inside of the window that you will be applying the window film to with a soapy water solution. Be sure to wipe away dirt and grime from the surface. Note: Do not use a household cleaner or ammonia based cleaner to clean the window prior to installing the window film.
*Use a lint free cloth to completely dry the surface prior to applying the film.
3. Trim window film to fit surface
*Unroll the window film and identify the backing liner and tint sides. Note: The backing liner side of the film is slick and the film side is sticky.
*Place the liner side on the glass that you wish to apply the film to. You may lightly wet the surface to hold the film in place while trimming.
Note: Be careful not to apply too much pressure as to cut the property behind the film.
4. Remove Backing Liner
*Carefully remove the backing liner from the window film while still in place on the outside window. Tip: Use 2 pieces of adhesive on opposite sides of the film in a corner and peel apart. Spray the inner sticky side of the film lightly with the spray solution. Wet your fingers also to prevent leaving fingerprints when handling the film. *Now that the adhesive side of the film is exposed, handle carefully to avoid creasing and crimping.
5. Applying the window film
*Spray the inside surface of the window thoroughly with soapy solution.
*Carefully remove the film from the outside window surface and place the wet sticky side against the wet inside window surface. *Fold up the excess window film at the bottom of the window so it will not pick up and dirt or grime and trim.

The boring stuff, these videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Kent Thomas & Inspire DIY do not take any responsibility for any action taken as a result of the information or advice on this YouTube channel (or other platforms) and shall not have any liability in respect of any injury or damage that may result.
Kent Thomas/Inspire DIY does not warrant the accuracy, completeness, or usefulness of the information available on this YouTube page or any other social media platforms. Nothing contained in or provided though this YouTube page, website or social media platforms is intended to constitute advice or to serve as a substitute for the advice of a building or construction professional, or local government, council laws and building codes. Any reliance you place on such information is strictly at your own risk.

свернуть