To connect the INGCO CUCLI2022 Li-ion USB-A charger, you will need to follow these steps:

Make sure the charger is not connected to any power source before starting.
Locate the USB-A port on the charger. It is usually labeled as such or has a recognizable USB symbol.
Take the USB-A cable that came with your device or another compatible one.
Locate the USB-A end of the cable. It has a rectangular shape with four metal contacts inside.
Insert the USB-A end of the cable into the USB-A port on the INGCO charger. Make sure it is fully and securely inserted.
Connect the other end of the USB-A cable to your device's charging port or any other compatible device you want to charge.
Once both ends of the cable are properly connected, you can connect the INGCO charger to the power source.
Short press the black button for about 1-2 seconds, the power supply should provide the required voltage and current for charging.
The INGCO CUCLI2022 Li-ion USB-A charger should now start charging your device.
when disconnecting the load, repeat the short pressing procedure of the black button.
To connect the flashlight you have to hold down the green button for about 5 seconds when disconnecting exactly the same.

Good luck !

Remember to always follow the manufacturer's instructions and guidelines when charging your devices to maintain safety and avoid potential damage.
#cucli2022 #ingco #usbcharger

свернуть