Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]
This video shows you how to install a front control arm on your 2009-2015 Honda Pilot. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2009 Honda Pilot
2010 Honda Pilot
2011 Honda Pilot
2012 Honda Pilot
2013 Honda Pilot
2014 Honda Pilot
2015 Honda Pilot
Tools you will need:
• Pry Bar [ Ссылка ]
• 22mm Wrench
• 14mm Deep Socket
• 19mm Socket [ Ссылка ]
• 22mm Socket [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Side Cutters
• Ratchet [ Ссылка ]
• Swivel
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Gloves [ Ссылка ]
• Rust Penetrant
• Safety Glasses [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Pole Jack
• Wheel Chocks
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
